PowerNet OpenAir Windows Test

Name
Company
Email address

1.) Which of the following is NOT an advantage of OpenAir Windows server over running Twin Client in thick mode?

Increased session stability
Improved network performance
Centralized control
Lower initial cost

2.) In Thin Mode, Airloader can be used to:

Update configuration changes to the terminal
Update the software on the terminals
Locate missing terminals
Wake sleeping terminals

3.) What services do you need to run on the computer that will be the OpenAir Windows server?

WWW service
FTP service
SMTP service
SQL service

4.) If a host should cease operation an alternate host can be selected by:

Rebooting the terminal
Choosing a host from the menu
Switching the physical host connection
Downloading new setup files to the terminal

5.) The SAC interval indicates:

The number of diagnostic messages generated
The time between events
How often the log files are updated
How often the server tests the RF network

6.) How many users could be logged in from one terminal using the Hotkeys option?

2
4
6
8

7.) In thin mode, the session between a terminal and the host is maintained:

By the host application
By the terminal client software
By the OpenAir server
By the protocol

8.) What menu section is used to do most of your configuring in OpenAir Windows?

Operations
General setup
Access Point
TCP/IP

9.) When configuration changes are made on the server, what must be done to apply those changes on the terminal?

Load the configuration using Airloader
Stop and restart the program on the terminal
Reboot the terminal
Nothing; the changes will appear automatically

10.) How many different Hosts can you configure?

1
2
5
More than 10

11.) In order for an end user to use a terminal to interact with a Host program at a remote location:

The firewall must allow traffic to pass from the terminal to an external Port 1801
The firewall must allow traffic to pass from the terminal to an external Port 23 (Telnet)
The terminal must have full Internet access
The terminal does not need any external access; the external access is only required for the OpenAir Windows server.

12.) You can control which terminal types are presented with a given menu choice on which menu:

General --> Host List
General --> Terminal Control
General --> Ports
Spectrum One --> Terminals

13.) The best place to create object editors is:

On the Utilities menu
In the PowerNet folder on the Start menu of the OpenAir Windows server
In the Twin Client Manager program
In Textpad

14.) In order for OpenAir Windows to be able to use object editors, they must be placed in which folder on the OpenAir Windows server?

PowerNet folder
Object Editors folder
OpenAir folder
System32 folder

15.) What’s a good response time from the server to a terminal connected via a OpenAir Windows server?

0.25 sec
1 sec
5 sec
10 sec

16.) Wireless View:

Allows you to see what the user is seeing on his/her terminal screen
Gives you a nice graphical view of the wireless topology
Generates network volume statistics for all nodes on the RF network
Causes the screen to refresh automatically